Late 60s -No Label- Mens three piece mod suit with black woven in striped wool jacket with medium width peaked lapels, one button, inset pockets, fitted silhouette, center vent, and full red satin lining, matching vest with pointed bottom, button front, two inset pockets, and full red satin back and lining, and matching flat front pants with straight legs, plain cuffless hems, top entry front pockets, back inset pockets, lined pants legs, and suspender buttons, custom tailored. There are 3 inches of fabric inside of the pants cuff, so they could be let down at least 2.5 inches for an overall inseam closer to 34 inches.Jacket chest:Pit to pit = 25.5 inchesThis would be snug on a 50 chest as the measurement is only allowing for 1 inch of ease. I’ve adjusted the chest size to fitting a 49" chest.Jacket shoulder:19.5 inches (measured seam to seam across the back)Jacket Sleeve (33 inches): Arm (shoulder to cuff) = 25.5 inchesLapel to shoulder = 7.5 inchesJacket length (outside edge of shoulder to hem) = 30 inchesVest:Pit to pit = 24.5 inchesNeck to tip = 29 inchesShoulder (outside edge) to hem = 25 inchesArm hole depth (shoulder to bottom of arm hole) = 10.5 inchesPants:Waist = 22 inches (measured taut, not stretched)Rise = 15.25 inches (waistband to crotch seam)Inseam (crotch seam to hem) = 31.5 inchesThere is 3 inches of fabric inside the cuff, so the pants could be let down at least 2.5 inches.The rise on the pants is typical for an early 60s suit.
